Mortar can be divided into many kinds, such as the plastering mortar asked by this friend. In fact, as long as the mortar is used on the surface of buildings or some components, it can be called plastering mortar. So we need to know the type of mortar first, then we can know some characteristics of mortar.

抹面砂漿的分類和特性

Classification and characteristics of plastering mortar

如果我們根據抹面砂漿的使用部位和功能來進行劃分凳寺，那么可以將抹面砂漿分為普通的抹面砂漿，裝飾砂漿旧搔，還有一些特殊功能的抹面砂漿旁核。特殊功能的抹面砂漿主要是指的一些防水砂漿，絕熱砂漿侣赘，吸音砂漿麦葱，以及一些耐酸耐堿砂漿等等涝猩。

If we divide according to the use position and function of the plastering mortar, then the plastering mortar can be divided into ordinary plastering mortar, decorative mortar, and some special function plastering mortar. The special function plastering mortar mainly refers to some waterproof mortar, insulation mortar, sound-absorbing mortar, and some acid and alkali resistant mortar, etc.

抹面砂漿频澜，它是為了后期裝飾使用的。所以說抹面砂漿都要求具有很好的和易性期司。這樣他可以便于以后施工试授。還有就是要求有較高的黏結力。這樣砂漿層與體面的基礎和以粘接牢固闭廊，能保證長期的不開裂辈畜，或者是出現空鼓脫落。第三點就是使用在潮濕環境或者是一些容易受外力作用的地方典义，還要具有較高的耐水性洽腊，還有強度。

Plastering mortar, which is used for later decoration. Therefore, the plastering mortar is required to have good workability. In this way, it can be convenient for later construction. There is also the requirement for a higher bond strength. In this way, the mortar layer is firmly bonded with the foundation and surface to ensure long-term non cracking, or hollowing off. The third point is that it should be used in humid environment or some places that are easy to be affected by external forces, and it should also have high water resistance and strength.

抹灰砂漿需要檢測的項目

Items to be tested for plastering mortar

成品的抹灰砂漿藕各，在出廠以后都會配有出廠的小票池摧。小票上會寫明檢查的項目。而且抹面砂漿會有相應的檢測報告激况。通過這些我們都可以發現作彤，抹面砂漿主要檢測的項目有五項，也就是：砂漿的稠度乌逐，砂漿的保水率竭讳，抗壓強度，拉伸粘接強度浙踢。

The finished plastering mortar will be equipped with a factory ticket after leaving the factory. The check items will be written on the ticket. And there will be corresponding test report for the plastering mortar. Through these, we can find that there are five main detection items of plastering mortar, namely: consistency of mortar, water retention rate of mortar, compressive strength, tensile bonding strength.

抹面砂漿針對以上的項目都需要進行檢測绢慢。檢測的要求是同一個生產廠家的，同一品種洛波，同一等級胰舆，同一批號，且連續進場的砂漿奋岁。一般要求砂漿每50立方思瘟，做一個檢驗批荸百，不足50立方時按照一個檢驗批來算。

The plastering mortar needs to be tested for the above items. The testing requirements are the mortar of the same manufacturer, the same variety, the same grade, the same batch number, and continuously entering the site. Generally, it is required to make an inspection lot for every 50 cubic meters of mortar. If it is less than 50 cubic meters, it shall be calculated as an inspection lot.