房子長期居住后垫暑,不可避免地會出現墻面剝落摄李,墻面裂縫等問題。這可能是墻面裝飾材料質量的問題沾陡。如果你想得到它诸跳,可以用石膏粉修補墻面裂縫。讓我們一起來看看如何用
濟南石膏粉修補墻面裂縫纫惰。
After long-term living in a house, it is inevitable that problems such as wall peeling and cracks will occur. This may be an issue with the quality of wall decoration materials. If you want it, you can use gypsum powder to repair wall cracks. Let's take a look at how to use Jinan gypsum powder to repair wall cracks together.
裂縫
crack
墻面漆層上的裂縫非常常見梅柑。它是由墻面漆的漆層裂縫引起的。如果僅在表面漆膜上形成裂縫瓢疤,好使用細砂紙清潔裂縫進行修復脯牛。然后,使用與原始?jí)Ρ谙嗤挠推岵⒅匦吕L制窥窜。
Cracks on the wall paint layer are very common. It is caused by cracks in the paint layer of the wall paint. If cracks are only formed on the surface paint film, it is recommended to use fine sandpaper to clean the cracks and repair them. Then, use the same paint as the original wall and redraw it.
裂縫
crack
如果在裝飾時原墻壁沒有裂縫仪彪,可能是由于接地不均勻和工作時溫差大而引起的裂縫。好找的主人檢查并遵循實際的裂縫條件划烫,以使用正確的修復方法蒲坐。
If there are no cracks on the original wall during decoration, it may be caused by uneven grounding and large temperature difference during operation. It is easy to find a professional owner to inspect and follow the actual crack conditions in order to use the correct repair method.
裂縫
crack
墻壁的抹灰層也會出現裂縫。無法避免正常轉移的劃分黄锤,應防止異常情況下的裂縫搪缨。如果抹灰層的空白區域太大,則必須從一開始就破壞抹灰層,先進行平整再涂漆副编,維護價格有點貴;如果是一個小面積的裂縫负甸,沒有空鼓,剝落等痹届。在墻上做好布呻待,然后再涂。
Cracks can also appear in the plastering layer of the wall. The division of normal transfer cannot be avoided, and cracks should be prevented in abnormal situations. If the blank area of the plastering layer is too large, the plastering layer must be damaged from the beginning, and it must be leveled before painting, which is a bit expensive to maintain; If it is a small area of crack, without hollowing, peeling, etc. Make a cloth on the wall and then apply it.

底縫縫合裂縫
Bottom seam stitching crack
墻底層的裂縫也會引起表面裂縫队腐,主要是在鋼筋混凝土剪力墻和陶粒磚蚕捉,石膏板隔墻和現有墻體接縫,后擋風門和鋼筋混凝土之間的接縫處柴淘。梁和陶粒磚之間的連接迫淹。
Cracks in the bottom layer of the wall can also cause surface cracks, mainly at the joints between reinforced concrete shear walls and ceramic bricks, gypsum board partitions and existing walls, and the joints between the rear windshield and reinforced concrete. The connection between beams and ceramic tiles.
膩?zhàn)訉恿芽p
Putty layer cracks
油灰層有一個柱子,它也會出現在墻上为严。這主要是由于操作中處理不當造成的柔睡。如果裂縫滲透到膩?zhàn)訉又校瑒t必須擴大裂縫阴应,然后填充并拋光填縫石膏。網布或牛皮紙后螺子,用膩?zhàn)舆M(jìn)行找平姚沽,后涂漆或壁紙,以達到全面修復偏笋。
The putty layer has a pillar that also appears on the wall. This is mainly caused by improper handling during operation. If the cracks penetrate into the putty layer, it is necessary to expand the cracks and then fill and polish the joint filling gypsum. After mesh or Kraft paper, use putty for leveling, and then paint or wallpaper to achieve comprehensive repair.
以上就是如何使用石膏粉修補墻面裂縫的一些相關知識蟹助,希望對您有所幫助。更多相關產品信息就來我們網站
http://m.bjtsdc.com咨詢吧莱艺!
The above is some relevant knowledge on how to use gypsum powder to repair wall cracks, hoping to be helpful to you. For more relevant product information, come to our website http://m.bjtsdc.com Consult!