In the dry season, the air humidity is relatively high. The putty powder manufacturer summarized what should be paid attention to when applying putty in the dry season.
1. Do not scrape the wall putty powder too thick: because the indoor air is dry and the water loss is fast, it is easy to cause hollowing, cracking and uneven wall surface.
2礼仗、干燥季節時吐咳，晚上一定要關緊門窗，防止墻面吸收空氣中水分元践，增加了墻面結構力韭脊，不宜打磨。
2. In dry season, the doors and windows must be closed at night to prevent the wall from absorbing moisture in the air, which increases the structural force of the wall and is not suitable for polishing.
3单旁、如果墻面出現部分下凹狀況沪羔，用石膏粉加乳白漆調和修補墻面，這樣便于加速干燥慎恒。當墻面出現較大裂縫時任内，局部的地方雙貼布條后再刮膩?zhàn)臃邸?/div>
3. If the wall is partially concave, repair the wall with gypsum powder and milky white paint, so as to accelerate drying. In case of large cracks on the wall, apply putty powder after double pasting cloth strips in local places.
4歇盒、批刮完二遍老萬寶膩?zhàn)臃酆笥乖睿瑝γ娣喊住o(wú)水漬印時立即打磨韩丸。干透越久結構力越高窘携，打磨難度大。
4. After the old Wanbao putty powder is scraped twice, the wall is white and there is no water stain, and it shall be polished immediately. The longer the drying, the higher the structural force and the greater the grinding difficulty.
5查新、墻面膩?zhàn)犹幚磉x溫度相對較高時段進行杀终，這樣可以防止新刮的膩?zhàn)觾鼋Y(jié)。待一遍膩?zhàn)油耆赏负笈龋俟味橄⒋希槟佔油耆赏负螅儆眉?xì)砂紙仔細打磨囤胯。
5. The treatment of wall putty should be carried out at relatively high temperature, which can prevent the new putty from freezing. After the first putty is completely dry, scrape it twice. After the second putty is completely dry, polish it carefully with fine sandpaper.
6员研、打磨膩?zhàn)訒r(shí)施工人員必須做好防護措施。帶好口罩蚪缚、手套阶质、避免皮膚不適。
6. When polishing putty, construction personnel must take protective measures. Wear masks and gloves to avoid skin discomfort.
刮膩?zhàn)拥撞奶幚硪话阋蠡鶎颖砻嬖谂文佔忧氨仨殘?jiān)實牢固米苹，不應有起砂糕伐、裂縫、疏松等缺陷蘸嘶。如果墻體平整良瞧，建議不使用膩?zhàn)?若使用膩?zhàn)樱妆∨灰撕袼?內墻膩?zhàn)臃蹜?yīng)見水不軟化膨脹训唱、不能手抹起粉褥蚯。對膩?zhàn)臃鄣囊蟪艘着状蚰ネ庋诨海€應具備較好的強度和持久性。對于外墻遵岩，廚房和衛生間你辣，其對膩?zhàn)臃鄣囊髴?yīng)具備更好的粘結性，粘結持久性及耐水性尘执。膩?zhàn)臃鄹珊笊岷澹蒙凹埓蚰テ秸儆脻癫紝⒛佔由系母』夷ㄈヌ芏В⒈M快涂漆表悬。
The treatment of puttying substrate generally requires that the base surface must be solid and firm before puttying, and there shall be no defects such as sanding, cracks, looseness and so on. If the wall is flat, it is recommended not to use putty; If putty is used, it is easy to apply it thin rather than thick; The putty powder of interior wall shall not soften and expand in the presence of water and cannot be applied by hand. The putty powder shall not only be easy to batch and polish, but also have good strength and durability. For exterior walls, kitchens and toilets, the requirements for putty powder shall have better adhesion, adhesion durability and water resistance. After the putty powder is dry, it shall be polished with sandpaper, and then the floating ash on the putty shall be wiped off with a wet cloth and painted as soon as possible.
魯公網安備